Analogue Set Plug in Timers

UK based manufacturer of Electronic Control Equipment

A Servecon Ltd Company

WANTED UK and Worldwide Stockists and Agents : WANTED

people counters, people counting, hand held tachometers, electronic counters, digital timers, plug in timers, proximity sensors, shaft encoders, level control, large digital display, digital panel meters, signal conditioning, electronic timers, timing relays, batch counters, totalizing counters, totalising counters, dpm, sensors, photoelectric, capacitive, inductive, photoelectric, encoder, signal conversion, ratemeter, incremental encoder, decade boxes, resistance substitution box, capacitance substitution box, data display, rs485, rs232, custom electronics, system designsystem designcustom electronicsrs232rs485data displaycapacitance substitution boxresistance substitution boxdecade boxesincremental encoderratemetersignal conversionencoderphotoelectricinductivecapacitivephotoelectricsensorsdpmtotalising counterstotalizing countersbatch counterstiming relayselectronic timerssignal conditioningdigital panel meterslarge digital displaylevel controlshaft encodersproximity sensorsplug in timerselectronic countersdigital timershand held tachometerspeople countingpeople counters

[UP] [PRODUCTS][HOME]

DO &DI Analogue set plug in timers

View Datasheet

	Delay On Timers
	Interval Delay Timers
	Delay after De-energisation Timers
	2 or 3 Pole changeover contacts rated at 8 amps
	Standard 8 or 11 pin plug in base
	Panel Mounting 48 x 48 mm Din Case
	6 standard time ranges
	5 supply voltages
	Time set by rotary control

Model DO - Delay On Mode of Operation: On application of the supply voltage the timing period starts. At the end of the timing period the relay is energised and remains energised until the timer is reset by removing the power.

Model DI - Interval Mode of Operation: On application of the supply voltage the timing period starts and the relay energises.At the end of the timing period the relay is de-energised and remains de-energised until the timer is reset by removing the power.

Model DE - Delay after De-energisation Mode of Operation: On application of the supply voltage the the relay energises. The relay remains energised while the power is maintained. After removal of the suppply the timing period starts and the relay remains energised. At the end of the time period the relay de-energises. Only time ranges 1 and 2 available with this model.

Output Relay:

2 Pole model	Contacts rated at 8 Amp @ 240VAC resistive
3 Pole model	Contacts rated at 5 Amp @ 240VAC resistive

Connections:

2 Pole models	Industry standard 8 pin plug in base.
3 Pole models	Industry standard 11 pin plug in base

Mounting: All types may be panel mounted using the clamp supplied as an alternative to plug in socket.

Time Ranges:

1	2	3	4	5	6
0.1 - 2 seconds	1 to 20 seconds	10 to 200 seconds	1 to 20 minutes	10 to 200 minutes	1 to 20 hours

Supply Voltages:

12	24	48	115	240
12 VAC/DC	24 VAC/DC	48 VAC/DC	115 VAC	240 VAC

Order Code:

{model}

{time range}

{supply voltage}

{3 pole}

example DO.2.240 - Do model , 20 seconds time , 240 VAC supply

example DI.6.12.3P - Three pole DI model, 20 hours time range, 12 VAC/DC supply

Options:

Factory set fixed times:

The timer can be accurately preset to any fixed times. There are no external controls to prevent tampering with the settings.

Remote start.

The DI model can be supplied so that it is started with a remote volt-free contact. The contact can be momentary or maintained

Remote Setting.

Any 2 pole model can be supplied with a seperate potentiometer that connects to the timer socket to allow the timer to be positioned remotely from the setting control.

Accessories:

PGS08	8 pin chassis or DIN rail mounting socket
PGS11	11 pin chassis or DIN rail mounting socket
FS08	8 pin free socket
FS11	11 pin free socket
RCS	Retaining clips

[UP] [PRODUCTS][HOME]


	Visa, Mastercard and Debit cards accepted