| |
[Back to Products][Custom
Design][Home]
Signal Conditioning
| TM420
- 4-20 mA
converter |
 | Converts pulses into a 4-20mA
analogue signal |
| PNP or NPN option |
| Three ranges covering 100 to 100,000
ppm |
| DC and AC powered versions |
| DIN rail or plug in
case |
| 12VDC output to power sensors |
| Standard 11 pin plug in base |
| Factory set calibration option |
| 115/230 VAC powered |
| Other outputs available ( 0 - 10mA
etc) |
|
View Data
Sheet pdf |
|
View
Data Sheet pdf |
 |
| TM010
- 0-10 volt converter |
|
Converts pulses
into a 4-20mA analogue signal |
|
PNP or NPN option |
|
Three ranges
covering 100 to 100,000 ppm |
|
DC and AC powered
versions |
|
48 x 48 mm DIN panel mounting or plug in
case |
|
12VDC output to power sensors |
|
DIN rail or plug in
case |
|
Can be used for
0-5 volt output signal |
|
Factory set
calibration option |
|
115/230 VAC
powered |
|
Other outputs
available ( 0 - 5 volts etc) |
|
|
View Data
Sheet pdf
|
|
|
View Data
Sheet pdf
|
|
| DIN-DA
universal signal conditioner |
|
Converts pulses into
analogue output |
|
NPN or PNP selection |
|
Dual output - 4 -20 mA
and 0 - 10 volt |
|
Three ranges covering
100 to 100,000 ppm |
|
DIN rail mounting
enclosure |
|
24 and 12VDC output to power sensors |
|
115/230 VAC and 24VDC powered |
| "fast" or
"slow" response times |
| Other outputs
available ( 0 - 10mA, 0 - 5 volts etc) |
|
|
[Back to Top]
|
