| |
[UP] [PRODUCTS][HOME]
DS96
5 decade digital tachometer with setpoint(s)
View
Datasheet
 |
 | 96 x 96 mm DIN standard Housing |
| 0.001 - 99999 RPM (ppm) |
| 1 or 2 setpoints |
| Over or under speed alarm |
| output relay(s)- 2 amp @ 240VAC changeover contact |
| Fully autoranging |
| 5 Digit scaling and 5 digit input pulse divider |
| Wide input frequency range |
| 115/230VAC or 12-28VDC supply |
| 5 and 12VDC output for proximity sensors etc |
| magnetic or NPN or PNP type inputs |
| Panel or plug in mounting |
|
Mode of Operation:
Ratemeter: Direct
reading of input pulse rate in pulses per minute from 0.00 1 to 9 9999. Use of
input scaling can give rate per hour, second ect.
Counting: Pulse
counting up to 99999 counts. Use of input scaling to give display in engineering
units
Accumulative time:
Displays the time taken for displayed count.
Specification
| Inputs: |
Pulse, inhibit |
| Signal
input:
|
Magnetic sensor or PNP or NPN source such as DC proximity switch |
| Indication:
|
Flashing LED to indicate pulses on input |
| DC
Output:
|
12 VDC @ 50 ma for powering sensors |
| Supply: |
115/240 VAC or 12 - 30 VDC (specify when ordering) |
| Relay:
|
SPCO 2A non-inductive 240 VAC or 30 VDC |
| Housing: |
96mm x 48 mm DIN standard panel mounting plastic |
| Dimensions: |
48 x 48 x 140 mm |
| Panel Cutout: |
45 x 92 mm |
| Connections: |
11 way screw terminal on rear panel |
| Order code
|
DS96-S1 or DS96 -S2,
DS96-S1-DC or DS96 -S2-DC |
[UP] [PRODUCTS][HOME]
|
