30 Years of serving the Industrial Controls market   ---   Design, manufacturing and Sourcing of all your control requirements

[Back to Products][Custom Design][Home]

Motion Control

ZM3 Motion failure detection  Click on Picture For Details
Relay changes state when time between input pulses exceed set time
Fail safe
48 x 48 mm DIN panel mounting or plug in case  
8 Amp single pole relay output
Voltages from 12 to 48 VDC or 115 / 240 VAC
12VDC output to power sensors
Time ranges from seconds to hours
Standard 11 pin plug in base

DZM Motion failure detection  Click on Picture For Details
3 decade digital setting
Relay changes state when time between input pulses exceed set time
Fail safe
48 x 48 mm DIN panel mounting or plug in case  
5 Amp 2 pole relay output
Voltages from 12 to 48 VDC or 115 / 240 VAC
12VDC output to power sensors
Time ranges from hundredths of seconds to hours
Standard 11 pin plug in base

Picture: DZM
TR1 - Tachometer Relay Click on Picture For Details
Relay changes state when input pulse rate exceeds set point
0 - 10000 RPM (PPM)
Adjustable start up delay
"overspeed" or "underspeed" versions
48 x 48 mm DIN panel mounting or plug in case  
10 Amp single pole relay output
Voltages from 12 to 48 VDC or 115 / 240 VAC
12VDC output to power sensors
Standard 11 pin plug in base

TR3 - Tachometer Relay  

Three adjustable setpoints
Two output relays - 5 amp single pole
"overspeed" and "underspeed" outputs
Voltages from 12 to 30 VDC (Automotive use)
4 selectable speed ranges from 100 to 100000 ppm
Surface mount enclosure
8 way screw terminal connector

[Back to Top]

 

 

Send mail to info@abtekcontrols.com with questions or comments about this web site.
Copyright © 2011 Abtek Controls Ltd