TP472 electronic digital timer

UK based manufacturer of Electronic Control Equipment

A Servecon Ltd Company

WANTED UK and Worldwide Stockists and Agents : WANTED

people counters, people counting, hand held tachometers, electronic counters, digital timers, plug in timers, proximity sensors, shaft encoders, level control, large digital display, digital panel meters, signal conditioning, electronic timers, timing relays, batch counters, totalizing counters, totalising counters, dpm, sensors, photoelectric, capacitive, inductive, photoelectric, encoder, signal conversion, ratemeter, incremental encoder, decade boxes, resistance substitution box, capacitance substitution box, data display, rs485, rs232, custom electronics, system designsystem designcustom electronicsrs232rs485data displaycapacitance substitution boxresistance substitution boxdecade boxesincremental encoderratemetersignal conversionencoderphotoelectricinductivecapacitivephotoelectricsensorsdpmtotalising counterstotalizing countersbatch counterstiming relayselectronic timerssignal conditioningdigital panel meterslarge digital displaylevel controlshaft encodersproximity sensorsplug in timerselectronic countersdigital timershand held tachometerspeople countingpeople counters

[UP] [PRODUCTS][HOME]

TP472 & TP472A 4 Decade Digital Timers

View Datasheet - TP472 or TP472A

	72 x 72 mm DIN standard Housing
	Time Down
	Delay or Interval Modes
	5 Amp changeover relay output
	115/230VAC or 12-28VDC supply
	12VDC output for proximity sensors etc
	Start, stop and reset inputs
	Crystal controlled accuracy
	10 time ranges
	Optional non-volatile memory of time value

Mode of Operation: This timer is programmed using the front panel push switches to set the time.

Interval mode: The timer starts from the set value and times down with the relay energised. At zero the timer stops and the relay goes off. Operating the reset input re-loads the time to await another start. The timer can be stopped at any time with the stop input, de-energising the relay. The timer can be re-started or reset from stop mode.

Delay Mode: The timer starts from the set value and times down with the relay de-energised. At zero the timer stops and the relay energises. Operating the reset de-energises the relay and reloads the time value. The timer can be stopped at any time, the relay remaining de-energised.

Specification

Modes	Interval or Delay
Time direction:	Down
Time ranges	TP472 - 9.999sec, 99.99sec, 999.9sec, 9999sec, 999.9min, 9999min, 999.9 hrs, 9999 hrs TP472A 99h:59m & 99m:59s
Inputs:	Start, Stop & Reset
Setting:	Push-Push switches
Relay output:	Single pole changeover contacts - 5 amp at 240VAC or 30VDC
Supply:	115/240 VAC or 12 - 30 VDC
Housing:	72mm x 72 mm DIN standard panel mounting plastic
Dimensions:	72 x 72 x 130 mm
Panel Cutout:	67 x 67 mm
Connections:	Rising cage screw terminals
Order code:	TP472 (no memory) or TP474B (memory)

[UP] [PRODUCTS][HOME]


	Visa, Mastercard and Debit cards accepted