TP696 electronic digital timer

30 Years of serving the Industrial Controls market --- Design, manufacturing and Sourcing of all your control requirements

people counters, people counting, hand held tachometers, electronic counters, digital timers, plug in timers, proximity sensors, shaft encoders, level control, large digital display, digital panel meters, signal conditioning, electronic timers, timing relays, batch counters, totalizing counters, totalising counters, dpm, sensors, photoelectric, capacitive, inductive, photoelectric, encoder, signal conversion, ratemeter, incremental encoder, decade boxes, resistance substitution box, capacitance substitution box, data display, rs485, rs232, custom electronics, system designsystem designcustom electronicsrs232rs485data displaycapacitance substitution boxresistance substitution boxdecade boxesincremental encoderratemetersignal conversionencoderphotoelectricinductivecapacitivephotoelectricsensorsdpmtotalising counterstotalizing countersbatch counterstiming relayselectronic timerssignal conditioningdigital panel meterslarge digital displaylevel controlshaft encodersproximity sensorsplug in timerselectronic countersdigital timershand held tachometerspeople countingpeople counters

[UP] [PRODUCTS][HOME]

TP696 & TP696A 6 Decade Digital Timer

View Datasheet TP696 or TP696A

	96 x 96 mm DIN standard Housing
	Time Down
	Delay or Interval Modes
	5 Amp changeover relay output
	115/230VAC or 12-28VDC supply
	12VDC output for proximity sensors etc
	Start, stop and reset inputs
	Crystal controlled accuracy
	9 time ranges
	Optional non-volatile memory of time value

Mode of Operation: This timer is programmed using the panel push switches to set the time.

Interval mode: The timer starts from the set value and times down with the relay energised. At zero the timer stops and the relay goes off. Operating the reset input re-loads the time to await another start. The timer can be stopped at any time with the stop input, de-energising the relay. The timer can be re-started or reset from stop mode.

Delay Mode: The timer starts from the set value and times down with the relay de-energised. At zero the timer stops and the relay energises. Operating the reset de-energises the relay and reloads the time value. The timer can be stopped at any time, the relay remaining de-energised.

Specification

Modes	Interval or Delay
Time direction:	Down
Time ranges	TP696 - 999.999sec, 9999.99sec, 99999.9sec, 999999sec, 99999.9min, 999999min, 99999.9 hrs, 999999hrs TP696 - 99hrs:59min:59sec
Inputs:	Start, Stop & Reset
Setting:	Push-Push switches
Relay output:	Single pole changeover contacts - 5 amp at 240VAC or 30VDC
Transistor output:	NPN open collector rated at 1A @ 30 VDC
Supply:	115/240 VAC or 12 - 30 VDC
Housing:	96mm x 96 mm DIN standard panel mounting plastic
Dimensions:	96 x 96 x 130 mm
Panel Cutout:	92 x 92 mm
Connections:	Rising cage screw terminals
Order code:	TP696 , TP696A

[UP] [PRODUCTS][HOME]

Send mail to info@abtekcontrols.com with questions or comments about this web site. Copyright � 2011 Abtek Controls Ltd

Send mail to info@abtekcontrols.com with questions or comments about this web site.
Copyright � 2011 Abtek Controls Ltd