30 Years of serving the Industrial Controls market   ---   Design, manufacturing and Sourcing of all your control requirements

A2103 Professional Optical/Contact Tachometers
 
These Tachometers are fully featured including 5 digit LCD inverting display with legends for all functions and measurement parameters, selectable ranges for revs, metres, feet, yards per minute or per second. With additional features including maximum, average and minimum reading capture, last reading hold, count revs or length & time modes.

 
Special Features Capture Mode
Maximum speed Capture max speed
Minimum speed Capture min. speed
Fast Timebase 0.1 seconds in Capture mode
Average Averages over last 8 readings

A2103/LSR/001 - Multi function Optical/Contact Counter, Timer & Speed Sensor with signal output facilities.

This model is very versatile dual purpose instrument, operating both as a multirange Optical or Contact Tachometer, Counter, Timer or a self powered remote Optical Sensor for machine monitoring requirements.

A ttl type pulse output facility and camera tripod mounting bush are standard features, designed for both hand held and fixed situations for monitoring continuous and occasional speed of machines.
 
Optical System General Specification
Optical Range
Optical Angle
Light
50 - 1000mm
+/- 45°
5v minilamp
Speed range -
Resolution -
Accuracy -
Update -
Count -
Time interval -
Memory -
On target ind. -
Low battery ind. Power -
Contact Adaptor -
Carrycase -
3 to 99,999 rpm and rps
max. 0.001 (autorange)
0.05% +/- 1 digit
0.8 sec
0-99999 units
0-99999 secs (auto ranging)
Holds last reading 1 minute
Yes
Yes x4 AAA batteries supplied
Supplied
Supplied
Laser Model Contact Measurement
Optical Range
Optical Angle
Laser Class

A2103/LSR/001
Optical Range
Optical Angle
Laser

 50 - 2000mm
+/- 80°
Class II


50 - 2000mm
+/- 80°
Class II

 With A2100/01 Adaptor fitted (supplied)
Revs, Metres, Feet, Yards per min or per second
 
Additional Information Signal Output
Patented Inverting Vertical LCD Display

Data output models work automatically in continuous operation mode when data cable is connected.

 Signal Output features
Pulse output facility - 5v Pulse output. Output via socket on rear of housing, supplied with 2 metre BNC output cable.

This model has these additional features
• Pulse output facility
• Tripod bush
• Signal output cable - 2 metres free ends
• Remote on/off via cable
 
Inverted examples of the A2103
 
 

 

Send mail to info@abtekcontrols.com with questions or comments about this web site.
Copyright © 2011 Abtek Controls Ltd