30 Years of serving the Industrial Controls market   ---   Design, manufacturing and Sourcing of all your control requirements

A2107 Professional Combi Engine Tachometer (Laser/Optical Diesel/Petrol)
 
Advent Engine Tachometers

The A2107 is ideal test Tachometer for most diesel engines applications, it not only functions with most types of Petrol and Diesel engines (where exposed injector pipes exist) it can also be used with its integral optical sensor for measurement of Engines without access to the Diesel or Ignition system.

Inverting display
This unique feature allows the Tachometers to be used through 180° rotation, providing easy readability in difficult applications.

Maximum revs capture mode
Allows the user to take "single shot" peak speed checks on machines with automatic over speed governors and centrifugal clutch checking, the actual maximum speed is held in the display.
 
Optical System General Specification
See Below

A2107
1 piece
1 piece
4 pieces
1 piece
1 piece
1 piece
2 pieces

1 piece
Note:

Kit includes
A2107 Tachometer
Stub Antenna
AAA Batteries
Test certificate
Instructions
Calibration certificate
Test leads for petrol
& diesel engines
Custom Carrycase
Transducers not included
Speed range -
Resolution -
Accuracy -
Display -
Update -
Capture Mode -
Controls -
Auto Off -
Signal Indicator -
Low Battery ind. -
Power -
Carrycase -
60 to 99,999 rpm Optical Mode only
1 rpm
0.05% +/- 1 digit
5 Digit LCD - Inverting
0.8 sec (normal mode)
0.1 sec
On, Invert, Capture, Radio
Auto shutdown if inactive for 5 min
Yes in display
Yes in display
x4 AAA batteries - supplied
Supplied
Laser Model Contact Measurement
Optical Range
Optical Angle
Laser		 25 - 2000mm
+/- 80°
Class II		 N/A
 
Additional Information Signal Output
Advent Professional Combi Engine Tachometer (Laser/Optical Diesel/Petrol)

Automatic Measurement - Auto switch off

The units operate continuously once powered on, measurement will be automatic while speed pulses are being received from the Transducer, after approximately 5 minutes of inactivity the instrument switches off.

Optical mode (Laser beam)
The Laser Optical measurement feature means that the instrument can be used on any rotating machine application, e.g. engines, fans, pumps, compressors, transmissions etc.

• Hands free operation (not optical mode)
• Integral Laser Optical range up to 2m
• Range of injector pipe Transducers available for 4.5mm - 14mm dia. Pipes for Diesel engines

 The Combi Engine Tachometer has remote input for the following transducers.
1. Diesel Transducers.
2. Ignition Antenna
 
Inverted examples of the A2107

 

Send mail to info@abtekcontrols.com with questions or comments about this web site.
Copyright © 2011 Abtek Controls Ltd