Vibration Meter Kit - VM110/K

The VM110/K is a very versatile battery powered Portable Vibration Meter kit which comes complete with transducer, Probe, cables and a magnetic base which allows hands free attachment to a machine. Both RMS and Peak measurements can be made in Acceleration, Velocity or Displacement terms. An AC output is also provided via a D type socket, this allows connection of filter sets, Fourier analysers etc for more complex signal processing. A DC output is also provided for recording purposes. Key features · Multiple measurement capability · AC & DC Outputs · Fully portable, battery powered · Magnetic Base adaptor supplied

General Specification Display Measuring Ranges Frequency Range Detector Accuracy (10mv/g input) - 3½ digit LCD - Acceleration: • 2g, 20g, 200g - Velocity: • 20mm/sec, 200mm/sec, 2000mm/sec - Displacement: • 20µm, 200µm, 2000µm - Upper Frequency: • Selectable LP filters of 5kHz, 10kHz, 20kHz - Lower frequency: • Acc - 5Hz • Vel - 10Hz • Dis - 15Hz - Switch selectable: RMS or Peak - All readings are +/- 1 digit added to the following errors which are stated for full scale reading. Acc. 1.5% RMS -3% Peak, Ver. 2.5% RMS -4% Peak, Dis. 3.5% RMS -5% Peak Accuracy is reduced by 9% @ 10kHz

Equivalent input noise - Sensor Input: - Outputs: - Power: - Battery state: - This is: Signal output with no measurement input RMS noise Acc: • 2g range = 2mg • 20g range = 2mg • 200g range = 20mg Vel: • 0.1mm/sec Dis: • 0.2µm For hand or fixed Transducers AC: and DC connections - 200mV fsd 2 x PP3 Batteries supplied Low batt. Warning In display Peak noise 6mg 6mg 60mg 0.3mm/sec 0.6µm

Additional Information Signal Output An ideal professional tool for the diagnostic engineer, the standard kit contains the following items: VM110/K Standard Kit package contents VM110 - Vibration meter 2100 - Hand held probe & cable MM001 - Magnetic base adaptor PS1 - Hand Held Spike Adaptor MC036 - 15 way D Connector AC and DC signal output is standard on this product